Source-Learning Chassis-Distributed - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

source-learning chassis-distributed

Enables or disables the distributed MAC source learning mode for the chassis. Enabling this mode
increases the number of learned MAC addresses supported to 16K per module and up to 64K per chassis.
source-learning chassis-distributed {enable | disable}
Syntax Definitions
enable
disable
Defaults
By default distributed MAC source learning mode is disabled for the chassis.
Platforms Supported
OmniSwitch 6850E, 9000E
Usage Guidelines
•
After the distributed MAC mode is either enabled or disabled using this command, immediately save
the switch configuration using the write memory command and then reboot the switch.
•
Distributed MAC source learning is not supported on an OmniSwitch stackable switches.
•
When the distributed MAC source learning mode is disabled (the default), the maximum number of
learned MAC addresses allowed per OmniSwitch chassis-based switch is 16K.
Examples
-> source-learning chassis-distributed enable
-> source-learning chassis-distributed disable
Release History
Release 6.1.3; command was introduced.
Related Commands
show source-learning chassis-
distributed
MIB Objects
slMacAddressTable
slDistributedMacMode
page 4-14
Enables distributed MAC source learning mode.
Disables distributed MAC source learning mode.
Displays the current status of the distributed MAC source learning
mode.
Source Learning Commands
OmniSwitch CLI Reference Guide June 2012