Show Interfaces Ifg - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show interfaces ifg

Displays interface inter-frame gap values.
show interfaces [slot | slot/port[-port2]] ifg
Syntax Definitions
slot
slot/port[-port2]
Defaults
By default, information is displayed for all ports on all modules.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Enter a slot number to display information for all interfaces on that slot.
•
Enter a slot and port number or a range of port numbers to display information for a specific interface
or a range of interfaces.
Examples
-> show interfaces ifg
Slot/Port ifg(Bytes)
-----------+-------------
02/01
02/02
02/03
02/04
02/05
02/06
02/07
02/08
02/09
02/10
02/11
02/12
02/13
02/14
02/15
02/16
02/17
02/18
page 1-94
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
Ethernet Port Commands
OmniSwitch CLI Reference Guide June 2012