Show Source-Learning Chassis-Distributed - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show source-learning chassis-distributed

Displays the current status (enabled or disabled) of the distributed MAC source learning mode.
show source-learning chassis-distributed
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
•
This command is not supported on OmniSwitch stackable switches.
•
When the distributed MAC mode is enabled, the MAC address table size is increased to allow more
learned MAC addresses (16K per module; up to 64K per chassis).
•
When the distributed MAC mode is disabled (the default), the maximum number of learned MAC
addresses defaults to 16K for all OmniSwitch chassis-based switches.
Examples
-> show source-learning chassis-distributed
Distributed MAC Mode Configuration = disabled
-> show source-learning chassis-distributed
Distributed MAC Mode Configuration = enabled
Release History
Release 6.1.3; command was introduced.
Related Commands
source-learning chassis-
distributed
MIB Objects
slMacAddressTable
slDistributedMacMode
page 4-38
Enables or disables the distributed MAC source learning mode.
Source Learning Commands
OmniSwitch CLI Reference Guide June 2012