Show Link-Fault-Propagation Group - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show link-fault-propagation group

Displays information for the specified Link Fault Propagation (LFP) group.
show link-fault-propagation group [group_id]
Syntax Definitions
group_id
Defaults
By default, information is displayed for all existing LFP groups.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
Enter a LFP group ID number with this command to display information for a specific group.
Example
-> show link-fault-propagation group
Group Id : 2
Source Port(s)
Destination Port(s)
Group-Src-Ports Status
Admin Status
Wait To Shutdown
Group Id : 6
Source Port(s)
Destination Port(s)
Group-Src-Ports Status
Admin Status
Wait To Shutdown
Group Id : 7
Source Port(s)
Destination Port(s)
Group-Src-Ports Status
Admin Status
Wait To Shutdown
-> show link-fault-propagation group 2
Group Id : 2
Source Port(s)
Destination Port(s)
Group-Src-Ports Status
Admin Status
Wait To Shutdown
page 1-144
An existing LFP group ID number. The valid range is 1–8.
: 0/1-2 1/1-5 1/7,
: 0/3 1/10-13,
: up,
: enable,
: 10
: 1/2 1/6 1/9,
: 1/10-11 1/13,
: down,
: disable,
: 5
: 1/1 1/3,
: 0/3 1/5 1/7 1/11 1/13 1/15 1/17 1/19 1/21 1/23,
: up,
: enable,
: 100
: 0/1-2 1/1-5 1/7,
: 0/3 1/10-13,
: up,
: enable,
: 10
Ethernet Port Commands
OmniSwitch CLI Reference Guide June 2012