Ethernet Port Commands
interfaces admin
Administratively enables or disables interfaces.
interfaces {slot | slot/port[-port2]} admin {up | down}
Syntax Definitions
slot
slot/port[-port2]
up
down
Defaults
parameter
up | down
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Enter a slot number to administratively enable or disable all interfaces on a specific slot.
•
Enter a slot and port number or a range of port numbers to administratively enable or disable a specific
interface or range of interfaces.
Examples
-> interfaces 3/1 admin up
-> interfaces 3 admin down
-> interfaces 3/1-4 admin up
Release History
Release 6.1; command was introduced.
OmniSwitch CLI Reference Guide
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
Enables the interface.
Disables the interface.
default
up
June 2012
page 1-21