Show Interfaces Flood Rate - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

show interfaces flood rate

Displays interface peak flood rate settings.
show interfaces [slot | slot/port [-port2]] flood rate
Syntax Definitions
slot
slot/port[-port2]
Defaults
By default, information is displayed for all ports on all modules.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Enter a slot number to display information for all interfaces on a specific slot.
•
Enter a slot and port number or a range of port numbers to display information for a specific interface
or a range of interfaces.
Examples
-> show interfaces flood rate
Slot/ Bcast
Port Value
--------+----------+-----+---------+----------+-----+---------+----------+-----+---
1/1 500
1/2 33
1/3 496
1/4 496
1/5 496
-> show interfaces 1/2 flood rate
Slot/ Bcast
Port Value
--------+----------+-----+---------+----------+-----+---------+----------+-----+---
1/2 33
output definitions
Slot/Port
Bcast Value
Bcast Type
page 1-96
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
Bcast Bcast Ucast
Type Status Value
pps enable
mbps enable
mbps enable
mbps enable
mbps enable
Bcast Bcast Ucast
Type Status Value
mbps enable 496
Interface slot and port numbers.
The broadcast storm value based on the type.
The type of broadcast (mbps, pps, percentage).
Ucast Ucast
Type Status
496 mbps enable
496 mbps enable
5 mbps enable
496 mbps enable
496 mbps enable
Ucast Ucast
Type Status
mbps enable
OmniSwitch CLI Reference Guide
Ethernet Port Commands
Mcast Mcast Mcast
Value Type Status
496 mbps enable
35 % enable
496 mbps enable
496 mbps enable
496 mbps enable
Mcast Mcast Mcast
Value Type Status
35 % enable
June 2012