interfaces ifg
Configures the inter-frame gap on Gigabit Ethernet interfaces.
interfaces {slot | slot/port[-port2]} ifg bytes
Syntax Definitions
slot
slot/port[-port2]
bytes
Defaults
parameter
bytes
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Enter a slot number to configure the inter-frame gap value for all interfaces on a specific slot.
•
Enter a slot and port number or a range of port numbers to configure the inter-frame gap value for a
specific interface or range of interfaces.
Examples
-> interfaces 3/1 ifg 10
-> interfaces 3 ifg 10
-> interfaces 3/1-4 ifg 10
Release History
Release 6.1; command was introduced.
Related Commands
show interfaces ifg
MIB Objects
esmConfTable
esmPortCfgIfg
page 1-26
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
Inter-frame gap value, in bytes. Valid range is 9–12.
default
12
Displays the inter-frame gap value for one or more ports.
Ethernet Port Commands
OmniSwitch CLI Reference Guide
June 2012