Show Interfaces Hybrid Status - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet Port Commands

show interfaces hybrid status

Displays interface line settings (for example, speed, mode) for combo ports only.
show interfaces [slot | slot/port[-port2]] hybrid {fiber | copper} status
Syntax Definitions
slot
slot/port[-port2]
fiber
copper
Defaults
By default, information is displayed for all ports on all modules.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 6850E
Usage Guidelines
•
Enter a slot number to display information for all interfaces on a specific slot.
•
Enter a slot and port number or a range of port numbers to display information for a specific interface
or a range of interfaces.
Examples
-> show interfaces hybrid fiber status
Slot/ AutoNego
Port (Mbps)
-----+--------+------+------+------+--------+------+------+------
1/45 Enable
1/46 Enable
1/47 Enable
1/48 Enable
2/45 Enable
2/46 Enable
2/47 Enable
2/48 Enable
FF - ForcedFiber PF - PreferredFiber
FC - ForcedCopper PC - PreferredCopper C - Copper
OmniSwitch CLI Reference Guide
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
Specifies that the status of the SFP port(s) will be displayed.
Specifies that the status of the copper 10/100/1000 RJ-45 port(s) will be
displayed.
DETECTED
Speed Duplex Hybrid
Type
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
June 2012
CONFIGURED
Speed Duplex Hybrid
(Mbps) Mode
1000 Full PF
1000 Full PF
1000 Full PF
1000 Full PF
1000 Full PF
1000 Full PF
1000 Full PF
1000 Full PF
F - Fiber
Trap
LinkUpDown
-
-
-
-
-
-
-
-
page 1-107