Ethernet Port Commands
show interfaces hybrid pause
Displays the flow control pause configuration for combo ports.
show interfaces [slot | slot/port[-port2]] hybrid {fiber |copper} pause
Syntax Definitions
slot
slot/port[-port2]
fiber
copper
Defaults
By default, information is displayed for all ports on all modules.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855
Usage Guidelines
•
Refer to the Hardware Users Guide for combo port numbering.
•
Enter a slot number to display information for all interfaces on a specific slot.
•
Enter a slot and port number or a range of port numbers to display information for a specific interface
or a range of interfaces.
Examples
-> show interfaces hybrid fiber pause
Slot/Port
Active
-----------+--------+---------------+--------+-----------+-----------
1/21
1/22
1/23
1/24
-> show interfaces hybrid copper pause
Slot/Port
Active
-----------+--------+---------------+--------+-----------+-----------
1/21
1/22
1/23
1/24
Active
OmniSwitch CLI Reference Guide
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
Specifies that the configuration of the SFP port(s) will be displayed.
Specifies that the configuration of the copper 10/100/1000 RJ-45 port(s)
will be displayed.
Wait time(usec) Cfg-Pause
-
0
-
0
-
0
-
0
Wait time(usec) Cfg-Pause
-
0
-
0
-
0
65535
June 2012
Cfg-Cross Hybrid Type
DIS
MDI
DIS
MDI
DIS
MDI
Tx
MDI
Cfg-Cross Hybrid Type
DIS
Auto
DIS
Auto
DIS
Auto
Tx-N-Rx
Auto
-
-
-
-
-
-
-
C
page 1-109