Examples - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Distributed Spanning Tree Commands
•
Loop-guard error state is recovered when the administrative state of the port is enabled or disabled.
•
When a VLAN is disabled, all the VLAN port associations recover from the error state.
•
The loop-guard feature can be enabled on the ports that have STP (RSTP, MRSTP or MSTP) enabled.
•
STP loop-guard on link aggregate protects all ports that are members of the link aggregation group.

Examples

-> bridge port 1/2 loop-guard enable
-> bridge port linkagg 1 loop-guard enable
-> bridge port 1/2 loop-guard disable
-> bridge port linkagg 1 loop-guard disable
Release History
Release 6.4.4; command introduced.
Related Commands
show spantree ports
MIB Objects
vStpPortConfigTable
vStpPortConfigIfIndex
vStpPortConfigLoopGuard
OmniSwitch CLI Reference Guide
Displays Spanning Tree port information for the flat mode Common and
Internal Spanning Tree (CIST) instance or a 1x1 mode VLAN instance.
June 2012 page 7-11