Show Interfaces Counters Errors - Alcatel-Lucent OmniSwitch 6850-48 Cli Reference Manual

Ethernet Port Commands

show interfaces counters errors

Displays interface error frame information (for example, CRC errors, transit errors, and receive errors).
show interfaces [slot | slot/port[-port2]] counters errors
Syntax Definitions
slot
slot/port[-port2]
Defaults
By default, information is displayed for all ports on all modules.
Platforms Supported
OmniSwitch 6400, 6850, 6850E, 6855, 9000E
Usage Guidelines
•
Enter a slot number to display information for all interfaces on that slot.
•
Enter a slot and port number or a range of port numbers to display information for a specific interface
or a range of interfaces.
•
These counters do not apply to Gigabit Ethernet traffic.
Examples
-> show interfaces 2/1 counters errors
02/01,
Alignments Errors = 6.45E13,
IfInErrors
Undersize pkts
output definitions
Slot/Port
Alignments Errors
FCS Errors
IfInErrors
IfOutErrors
Undersize pkts
Oversize pkts
OmniSwitch CLI Reference Guide
The slot number for a specific module.
The slot and port number (3/1). Use a hyphen to specify a range of ports
(3/1-3/10).
FCS Errors = 7.65E12
= 6435346, IfOutErrors= 5543,
= 867568, Oversize pkts = 5.98E8
Interface slot and port number.
Number of Alignments errors.
Number of Frame Check Sequence errors.
Number of received error frames.
Number of transmitted error frames.
Number of undersized packets.
Number of oversized packets (more than 1518 octets).
June 2012 page 1-83