Table of Contents
Advertisement
2
Upgrading a Model 30 (No Diskette)
This chapter contains installation procedures for upgrading a
VAXstation 3100 model 30 system without a diskette drive to a
VAXstation 3100 model 38 system without a diskette drive.
2.1 PV11U-CA Kit Contents
The following table lists the contents and part numbers of the PV11U-CA
kit:
Kit Item
KA42-BA system module
Owners manual, network guide, site planning
VAXstation 3100 Upgrade Installation Guide
Upgrade label
Power supply caution label
Medallion, VAXstation 3100 M 38
Three power supply safety screws (one screw is extra)
Drive plate, MSC module, 4 cables
Thirteen screw/grommets (6-32) (RZ22/RZ23 mounting
screws/grommets, four per drive)
Only Used if a TZ30 Tape Drive is Installed:
Five screw/grommets (metric M3)
Bezel insert for the TZ30 tape drive
TZ30 plate
TZ30 mounting screws/grommets, one screw is extra.
16
Part Number
54-19356-01
EK-VSM30-DK
EK-345AA-IN
36-15946-01
36-20124-01
12-30934-01
70-26723-01
12-31734-01
12-31734-02
74-37501-01
74-39199-01
Advertisement
Table of Contents
