Chapter 23
23.4 Connection to N-Wire Emulator
23.4.1 KEL connector
Figure 23-4
730
To connect the N-Wire emulator, a connector for emulator connection and a
connection circuit must be mounted on the target system.
As a connector example the KEL connector is described in more detail. Other
connectors, like for instance MICTOR connector (product name: 2-767004-2,
Tyco Electronics AMP K.K.), are available as well. For the mechanical and
electrical specification of these connectors refer to user's manual of the
emulator to be used.
KEL connector product names:
• 8830E-026-170S (KEL): straight type
• 8830E-026-170L (KEL): right-angle type
Connection to N-Wire emulator (NEC Electronics IE-V850E1-CD-NW:
N-Wire Card)
User's Manual U18743EE1V2UM00
On-Chip Debug Unit