4. Monitoring the Unit
Viewing System and Test Status
To view System and Test Status information, follow this menu selection sequence:
The System and Test Status screen has three sections:
T
T
T
4-2
Main Menu
Status
main/status/system
Slot: 4
HEALTH AND STATUS
-------------------------------------------------------------------------------
LOS at Net, Pt n
OOF at Net, Pt n
EER at Net, Pt n
SYNC Pt Down, Pt n
Net Margin Threshold, Pt n
Fallback Rate, Pt n
Device Failed yyyyyyyy
Download Failed
Net Com Link Down
Mismatch Rate, Pt n
-------------------------------------------------------------------------------
Health and Status – Displays messages in priority order (highest to lowest).
Refer to
Table 4-1, Health and Status
Self-Test Results – Results of the Diagnostic test run on the device itself.
Refer to
Table 4-2, Self-Test Results
Test Status – Currently active tests. Refer to
Messages.
February 2001
System and Test Status
SYSTEM AND TEST STATUS
SELF-TEST RESULTS
CPU Failed
Device Failed
Net DSL Failed, Pt n
SYNC Pt Failed, Pt n
Memory Failed
Failure xxxxxxxx
Passed
ESC for previous menu
Messages.
Messages.
Table 4-3, Test Status
Hotwire
Model: 87x5
Page 1 of 1
TEST STATUS
No Test Active
LLB Test Active, Pt n
RLB Test Active, Pt n
DTLB Test Active, Pt n
DCLB Test Active, Pt n
511 Test Active, Pt n
Lamp Test Active
MainMenu
Exit
8700-A2-GB25-10