Monitoring the Unit
What to Monitor
Board Status
7924-A2-GB20-20
This chapter presents information on how to access and monitor status and
performance statistics for the unit and its network connection. You can monitor
operations by viewing:
Board Status option from the Main Menu
Performance Monitor option from the Main Menu
Board Status and Performance Monitor options from the HTUC (or HTUR)
menu (for displaying information about the unit on the other end of the
connection)
Front Panel LEDs
Board Status option from the Main Menu displays HDSL circuit operational status.
Enter 1 at the Command prompt to display board status.
Command
1
T1 STATUS:
Network is UP
LOOPBACK STATUS: OFF
HDSL STATUS:
LOOP A is UP, LOOP B is UP
S/N RATIO:
Loop A = 44.0 dB, Loop B = 43.5 dB
Command
Board Status for DSX-1-Compatible Unit
August 1997
6
6-1