Table 4–1. Default Error Codes
Error Code
EATN
ENAD
ENAR
ENDG
ENDS
ENEA
ENEQ
ENEX
ENMD
February 2003
This chapter lists both the default and general error codes.
For default error codes, go to
For general error codes, go to
Errors may be generated by any command or command response
message. The example of an error message is shown below:
CPX-1000 2000-06-06 16:47:19
M
1 DENY
/* Can't login */
Error Type
Error Message
EQUIPAGE
Not Valid for Access Type
EQUIPAGE
Not Equipped with Audit Capability
EQUIPAGE
Not Equipped with Automatic Reconfiguration
EQUIPAGE
Not Equipped with Diagnostic Capability
EQUIPAGE
Not Equipped with Duplex Switching
EQUIPAGE
Not Equipped with Error Analysis Capability
EQUIPAGE
Not Equipped
EQUIPAGE
Not Equipped with Exercise Capability
EQUIPAGE
Not Equipped with Memory Device
C
H
A
P
Error Codes
Table 4–1
Table 4–2
error code
PIUI
4
T
E
R
on page 4-1.
on page 4-5.
4-1