Displaying Cross Connect Status - Paradyne 9161 User Manual

Displaying System Information

Displaying Cross Connect Status

4-4
View this field . . .
1
T-R Receive
Trunk Cond CGA
For the E&M Voice APM
Port Status
Assigned To
Operating Mode
Signaling Type
Call Progress
1
Tx ABCD bits
1
Rx ABCD bits
1
E-Lead State
1
M-Lead State
Trunk Cond CGA
1
For maintenance use
Slot assignments are made using the Cross Connect configuration option. See
the Technical Reference for making time slot assignments. Use the Cross
Connect Status screen to display time slot assignments for:
Network Channels
DSX-1 Channels
Ports
November 1996
To find the . . .
Status of what the attached device is doing with the Tip
and Ring leads of the FXS port.
Loop. Tip and Ring are connected together
Rgnd. Ring lead is grounded by attached device
Open. Ring lead is not connected to either the Tip
lead or the ground
Displays the status of trunk conditioning (On for CGA,
Off for no CGA).
Status of the port.
Interface the port is assigned to.
Operating mode of the voice port that was configured
using the Operating Mode configuration option on the
Voice Ports screen. See the Technical Reference for
configuration information.
Type of signaling used by the voice port that was
configured using the Signaling Type configuration option
on the Voice Ports screen. See the Technical Reference
for configuration information.
Current condition of the port.
Current value of the ABCD bits that are being
transmitted to the T1 interface.
Current value of the ABCD bits that are being received
from the T1 interface.
Current status of the E-lead (On or Off).
Current status of the M-lead (On or Off).
Displays the status of trunk conditioning (On for CGA,
Off for no CGA).
9161-A2-GB20-00