Configuration Procedures; Displaying/Editing Configuration Options; Saving Edit Changes - Paradyne 3164 Quick Reference

Configuration Procedures

For detailed configuration procedures see Chapter 4, Configuration , and Appendix C,
Configuration Options , of the Operator's Guide .

Displaying/Editing Configuration Options

To display/edit configuration options:
1. From the top-level menu screen (which you can access by pressing the
select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key (F1, F2, or F3). Use the scroll keys (
necessary.
The Factory 1 configuration for ESF framing format and B8ZS line coding format is
the default configuration and is appropriate for most networks. For D4 framing
format and AMI line coding format, use the Factory 2 configuration.
3. Select Edit.
4. From the Edit screen, select the functional group you want to edit by pressing the
appropriate Function key. Use the scroll keys (

Saving Edit Changes

To save edit changes:
1. From the Choose Funct screen (one level above the Edit screen, two levels below
the top-level menu screen), select Save.
2. Choose whether you want to save to the Active, Customer 1, or Customer 2 area.
Use the scroll keys (
Configuring the DTE Port
Network DS0s must be mapped to the DTE port for DSX-1 voice to a PBX. To assign
Network DS0s 1 through 12 to the DTE port for voice traffic to a PBX:
1. From the top-level menu screen, select Cnfig.
2. Select Activ.
3. Select Edit.
4. Select DTE.
5. Using Table 1 as a guide make sure that the DTE port is enabled and that the
framing and coding are appropriate for the PBX. If the DTE port will not be used,
make sure that it is disabled.
and ), if necessary.
4
and
and ), if necessary.
key),
), if