Displaying E1 Ntu Test Status - Paradyne 3350 User Manual

ACCULINK 3350 E1 NTU

Displaying E1 NTU Test Status

Use the Test Status command to display the active tests
for the E1 NTU. Status messages that can display on the
front panel LCD are listed in Table 4-10.
To display test status,
1. From the top-level menu screen, select Stat.
E1 HDSL NTU
Stat
F1
2. From the Status screen, press the
TStat selection appears on the screen.
Message
No Test Active No tests are currently active.
LLB Test Active The network interface is in Line loopback.
PLB Test Active The network interface is in Payload loopback.
DLB Test Active The G.703 DTE port is in DTE loopback.
RLB Test Active The G.703 DTE port is in Repeater loopback.
1–8 Test Active A 1-in-8 test pattern is being sent on the network interface.
32767 Tst Active A 32767 test pattern is being sent on the network interface.
Mon 32767, Net A 32767 test pattern is being monitored on the network interface.
DLB Test, Extrn The G.703 DTE port is being held in DTE loopback by the external contact.
Lamp Test Active The Lamp test is currently active.
4-22
Test Cnfig
F3
F2
key until the
Table 4-10
Test Status Messages
June 1996
Status:
HDSL DevHS STest
F1
3. Select TStat.
Status:
STest Perf
F1
The Test Status screen appears showing you what
tests are active for the E1 NTU.
Description
F2 F3
TStat
F2 F3
3350-A2-GB20-10