Displaying Voice Apm Status - Paradyne 9161 User Manual

Displaying Voice APM Status

9161-A2-GB20-00
Use the Voice APM Status screen to display information concerning voice cards
that you have installed in your system.
Procedure
1. Follow this menu sequence to display the Voice APM Status screen.
Main Menu Status
2. Enter the slot number of the desired voice APM in the SLOT field. The Voice
Port Status screen differs, depending on whether you are accessing an FXS
or an E&M Voice APM.
View this field . . .
For the FXS Voice APM
Port Status
Assigned To
Operating Mode
Signaling Type
Call Progress
1
Tx ABCD bits
1
Rx ABCD bits
1
T-R Control
1
For maintenance use
November 1996
Displaying System Information
Voice APM Status
To find the . . .
Status of the port.
Interface the port is assigned to.
Operating mode of the voice port that was configured
using the Operating Mode configuration option on the
Voice Ports screen. See the Technical Reference for
configuration information.
Type of signaling used by the voice port that was
configured using the Signaling Type configuration option
on the Voice Ports screen. See the Technical Reference
for configuration information.
Current condition of the port.
Current value of the ABCD bits that are being
transmitted to the T1 interface.
Current value of the ABCD bits that are being received
from the T1 interface.
Current status of the tip and ring leads:
RbTo. A – 48 Vdc battery is applied to the Ring lead
and the Tip lead is opened
RbTg. A – 48 Vdc battery is applied to the Ring lead
and the Tip lead is grounded
TbRg. A – 48 Vdc battery is applied to the Tip lead
and the Ring lead is grounded
Ring. Ringing voltage is applied between Tip and
Ring
4-3