Table of Contents
Advertisement
8. Remove the cable from the air baffle clips, then remove the HPE Smart Storage Battery from the air baffle.
Remove the air baffle
Procedure
1. Power down the system (Power down the system).
2. Remove the system from the rack (Remove the system from the rack).
3. Place the system on a flat, level work surface.
4. Remove the access panel (Remove the access panel).
5. Open the cable management holder, and then remove the cables from the cable management holder (Open the cable
management holder).
6. Remove the HPE Smart Storage Battery if it is installed on the air baffle (Remove the HPE Smart Storage Battery).
7. Remove the air baffle.
46
Removal and replacement procedures
Advertisement
Table of Contents
