Expansion Board Options; Pcie Slot Guidelines For Network Cards And Pcie Workload Accelerator Options - HPE ProLiant DL180 User Manual

9. Install the access panel.
10. Install the server into the rack.
11. Connect all peripheral cables to the server.
12. Connect each power cord to the server.
13. Connect each power cord to the power source.
14. Power up the server on page 43.
The installation is complete.

Expansion board options

PCIe slot guidelines for network cards and PCIe workload accelerator
options
The following table shows the PCIe riser board slots supported with the network cards and the PCIe
workload accelerator options of the server.
Component
HPE Ethernet networking card Yes
HPE Ethernet 4-port
networking card
HPE 10 Gb networking card
(Supported up to max 3 pcs)
Slot 1 Slot 2
Yes
Yes Yes
Yes No
Slot 3 Slot 4
Yes Yes
Yes No
No Yes
Hardware options installation
Slot 5 Slot 6
No Yes
No Yes
Yes No
Table Continued
95