Table of Contents
Advertisement
14. Install the fan cage.
15. Install the air baffle.
16. Install the access panel.
17. Install the server into the rack.
18. Connect each power cord to the server.
19. Connect each power cord to the power source.
20. Power up the server.
The installation is complete.
Accelerator options
This server supports various accelerator options to meet your computational and graphics workload requirements. For a
list of supported accelerator models, see the server QuickSpecs on the Hewlett Packard Enterprise website (https://
www.hpe.com/info/qs).
•
PCIe workload accelerators – These options are PCIe card‑based, direct‑attach solutions that use solid‑state storage
technology directly on the PCI bus to boost I/O performance and reduce latency to scale in line with your processing
requirements.
•
Computation and graphics accelerators – These options deliver accelerated compute performance for a range of deep
learning, high-performance computing (HPC), and graphics-intensive applications.
Installing an accelerator or GPU
This server supports up to three double width or five single width accelerators. The accelerator/GPU can be installed into
the primary, secondary, or tertiary position. This procedure shows an installation in the secondary position.
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment, remove the power
cord to remove power from the server. The front panel Power On/Standby button does not completely shut off
system power. Portions of the power supply and some internal circuitry remain active until AC power is removed.
Hardware options installation
121
Advertisement
Table of Contents
