Power Up The Server; Hardware Options Installation - HPE ProLiant MicroServer Gen10 Plus v2 User Manual

Hide thumbs Also See for ProLiant MicroServer Gen10 Plus v2:

Table of Contents

4. If removed, install the chassis cover .

5. If removed, install the security padlock and/or the Kensington security lock.

For more information, see the lock documentation.

6. Connect all peripheral cables to the server.

7. Connect the power adapter to the server, and then secure the power adapter cord in the power cord clamp.

8. Connect the power cord to the AC source.

9. Power up the server .

Power up the server

About this task

To power up the server, use one of the following methods:

Press the Power On/Standby button.

Use the virtual power button through iLO 5.

This chapter provides instructions for installing supported hardware options. To ensure proper server deployment and operation, Hewlett

Packard Enterprise recommends installing only HPE‑validated hardware options. To see the list of validated options for this server, see the

product QuickSpecs on the HPE ProLiant MicroServer Gen10 Plus v2 website:

https://www.hpe.com/servers/microserver-gen10-plus-v2

To view the warranty for your server and supported options, see Warranty information.

Subtopics

Server data backup

HPE ProLiant MicroServer Gen10 Plus v2 User Guide

Table of Contents