Setting The Screen Configuration; User Management - Dürkopp Adler D869 e-con Operating Instructions Manual

Programming Commander DELTA
Operating Instructions D869 e-con - 00.0 - 06/2023
5.3.6

Setting the screen configuration

The screen configuration is used for the display of the tiles in
Manual mode.
The setting is explained at the appropriate place in the chapter
on Manual mode ( p. 76).
5.4

User Management

The User Management section allows you to create users and
roles with different authorizations.
The setting is such that the Default User will automatically
be logged in when the machine starts. You can change this setting
at the Technician level as needed.
The following is an explanation of the user
Default Technician, who is set up as the default user.
You can set up any number of users and roles that meet your
individual requirements.
Requirement for User Management administration: You have to
be logged in as the Default Technician.
To log in as the Default Technician:
1. Press the symbol
 This opens the navigation interface.
Fig. 38: User Management (1)
(1) - Logout
to bring up the navigation pane.
①
61