52
Fig. 14: Seam appearance example
②
①
(1) - Starting point/first stitch
1.
Enter the stitch appearance coordinates in MS Excel or a text
editor.
The coordinates are accurate to 0.1 mm and are separated
by a comma.
Important
In a text editor, the last coordinate line must be actively terminated
with a line break so that the cursor is in the next empty line.
2.
Save the file:
• File name: HSR2000 ~ HSR2099
• File format: .CSV
3.
Store the file on a USB stick.
Information
It is also possible to create seam appearances using DA-CAD
5000 and save these as CSV files.
5.22 Working with a USB stick
Up to 10 custom seam appearances can be loaded into the
controller via a USB stick.
Prerequisite:
• Machine is in programming mode, Ready button LED is off.
1.
Plug the USB stick into the USB port on the controller.
The controller beeps briefly.
(2) - End point/last stitch
Operating Instructions 512/532 - 04.0 - 08/2016
Programming