Lubricating With Grease - Dürkopp Adler 513 Operating Instructions Manual

Maintenance
Operating Instructions 513/533 - 01.0 - 09/2023
5.2.2

Lubricating with grease

Allowing the machine to operate at peak efficiency requires that
its moving parts be lubricated sufficiently.
Lubrication points on the rear of the machine
Fig. 53: Lubricating (1)
①
②
(1) - Cam disk
(2) - Fleece
To lubricate the rear of the machine:
1. Apply an adequate amount of grease to the fleece (2) to lubri-
cate the outer side of the cam disk (1).
2. Apply a small amount of grease to the joints (3) to ensure
they remain flexible.
(3) - Joints
③
81