Sewing motor
16.3
Fig. 85: Assembling the sewing motor (1)
(1) - Support plate
(2) - Screws
(3) - Toothed belt wheel
To assemble the sewing motor:
1. Attach the motor (4) to the support plate (1) using 4 screws (2).
2. Fit the toothed belt wheel (3).
Service Instructions D869 e-con - 00.0 - 09/2023
Assembling the sewing motor
NOTICE
Property damage may occur!
Possible damage to the PCB.
Make sure the toothed belt runs straight and along the center of
the toothed belt wheels.
①
Make sure that the cables (5) are on the outside.
②
②
(4) - Motor
(5) - Cables
⑤
④
③
99