Assembling The Led Sewing Light - Dürkopp Adler D887 e-con Operating Instructions Manual

Setup
Operating Instructions D887 e-con - 00.0 - 11/2023

7.14 Assembling the LED sewing light

NOTICE
Property damage may occur!
Cables may sustain damage and impair the operation of
the machine.
Always lay the cables so as not to create any chafing or
pinching points.
The following is required for assembling the LED sewing light:
• LED sewing light
• Junction box
• Sewing light transformer
Fig. 106: Assembling the LED sewing light (1)
①
(1) - Cover
To assemble the sewing light:
1. Switch off the machine.
2. Disassemble covers (1) and (2).
(2) - Cover
②
195