Removing And Replacing The Eight Sff Hot-Plug Drive Backplane - HPE ProLiant ML30 Gen10 Maintenance And Service Manual

11. Remove the drive backplane.
Retain the screw for future use.
To replace the component, reverse the removal procedure.

Removing and replacing the eight SFF hot-plug drive backplane

Removing and replacing the eight SFF hot-plug drive backplane
Prerequisites Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
Procedure Procedure
1. Power down the server.
2. Remove all power:
a. Disconnect each power cord from the power source.
HPE ProLiant ML30 Gen10 Server Maintenance and Service Guide 54