Removing And Replacing A Drive Blank; Removing And Replacing A Drive Blank From The Front Drive Cage - HPE ProLiant DX4200 Gen10 Maintenance And Service Manual

Removing and replacing a drive blank

Removing and replacing a drive blank from the front drive cage

CAUTION: Do not operate the system with any of the front or rear drive cage bays empty. To maintain proper
airflow and sufficient cooling, all drive bays in the front and rear cage must have a drive or a drive blank.
Procedure
1. Remove the drive blank:
• LFF drive blank
To replace the LFF drive blank, slide the component into the bay until it clicks.
• SFF drive blank
Removal and replacement procedures
47