Using An Suv Cable To Access Usb Drives In A Kvm Setup; Processor Heatsink Assembly Option; Installing The Processor Heatsink Assembly - HPE ProLiant DX170r Gen10 User Manual

Using an SUV cable to access USB drives in a KVM setup

The USB connectors on the SUV cable do not support USB devices that require a power source greater
than 500 mA at 5 V. When accessing this type of USB drives, such as a USB key or a USB optical drive,
use a USB hub in a KVM setup.
Procedure
1. Connect the SUV cable to the SUV port.
2. Connect a monitor to the video connector.
3. Connect a USB hub to the USB connector.
4. Connect a USB mouse to the USB hub.
5. Connect a USB keyboard to the USB hub.
6. Connect a USB key or a USB optical drive to the USB hub.

Processor heatsink assembly option

Installing the processor heatsink assembly

Procedure
1. Review the HPE Gen10 Servers Intelligent System Tuning whitepaper at the following website:
http://www.hpe.com/support/ilo-docs
2. Identify the processor, heatsink, and socket components.
3. Review the processor cautions.
4. Install the processor heatsink assembly on page 43.
42 Hardware options installation