Aes Input And Output Audio Connections ("-Aes4" Versions Only); Table 1: Aes Audio Connector Pinout - evertz 7700 Manual

7700 MultiFrame Manual
7710XUC-HD HD Format Up/Down/Cross Converter
2.4.

AES INPUT AND OUTPUT AUDIO CONNECTIONS ("-AES4" VERSIONS ONLY)

Four unbalanced AES inputs and outputs are provided on eight BNC connectors on the HD DB-15
connector labeled AES I/O on the 7710XUC-AES4-HD and 7710XUDC-AES4-HD. These inputs and
outputs are for unbalanced AES signals conforming to SMPTE 276M. The user can select whether audio
from the four AES input pairs, or from two groups of embedded audio, is re-embedded on the output
video. The transferred audio is also output as four AES pairs. Table 1 shows the DB15 connector pinout.
Name
GPI2
LTC Out
GPO1
LTC In
AES In 2
GPI1
AES Out 2
AES Out 1
AES In 1
AES Out 4
AES Out 3
AES In 4
AES In 3
GND
Both the 7710XUC-AES4-HD and 7710XUDC-AES4-HD are shipped with a breakout cable for the 15 pin
D connector (Evertz Part # WA-1XY-R or WPAES8-BNCM-6F), which can be used to facilitate wiring the
audio and GPI connections. The pinout of the cables are shown in Table 2 and Table 3.
7710XUC-HD
-6
Description
Reserved for Future Use
LTC output (7710XUDC only)
Reserved for Future Use
Reserved for Future Use
Reserved for Future Use
LTC input (7710XUDC only)
AES Input 2 - Unbalanced
Reserved for Future Use
AES Output 2 – Unbalanced
AES Output 1 – Unbalanced
AES Input 1 - Unbalanced
AES Output 4 – Unbalanced
AES Output 3 – Unbalanced
AES Input 4- Unbalanced
AES Input 3- Unbalanced
Ground

Table 1: AES Audio Connector Pinout

Revision 1.0
DB-15
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Shell