Ericsson ZAT 19.2 Operation Manual page 90

V Result Code format
Commands: VO, V1
V-command causes the Result Codes to be displayed in short or
verbal form.
ATV0 pil fy Enables (numeric) short-form result codes.
gue
ATV1 pl oS Selecis verbal result codes
"7A summary of the Result Codes is listed at the end of
the AT-commands. The Result Codes may be displayed
in verbal form. (CONNECT 1200) or in short form
CONNECT 1200 changes to 5.
+V Select ITU-T V25 bis Command Mode
Command: +V
ITU-T V25 bis commands are now accepted.
Use SAT command to return to AT command
set
AT+Veital Sets ITU-T V25 bis command mode. Only the
"V 25 bis Commands are listed at the end of this chapter.
+&VC Channel choice when activating VOICE/DATA
Commands: +&VC0O, +&VC1
This parameter is only used when operating in switched-line
mode.
5 : a i
AT+&VCO pie Automatic channel choice means that the
' | modem will enter the answer handshake if
> TRING" is detected, else it will enter call
ae ees 7" Testablishment
ATLOUE oii. | Channel is determined by +&FC-
AT + &VC1 pl Cc y command,
selecting answer or call
3-52 LZTR104006 R1.00
ZAT 14.4/14.4-7 and Zat 19.2/19.2-7