Table of Contents
Advertisement
dvanced features
12.4
Setting up the auto-answering system
12.4.1.
Automatic answer
The following command sets the modem in auto answer mode:
\TSO=1 esfcal)
oc [The modem is now ready for automatic
->[ answer. It will reply after a single ring.
The sender rings to the receiver's modem. When the response
code (e.g. CONNECT 9600 appears on the screen, the
connection is complete and the dialogue may begin.
12.4.2
The host-mode at preset speed
Several modern communications programs can be preset to
automatically receive incoming data messages.
Example:
Smith.uses his PC at the office:
work here, he prefers to take hi
there. However, he forgets some |
office PC. and rings there and "fe
a host program.
Use of this procedure assumes predetermined settings. For
example, it must not be possible for unauthorised persons to be
able to access the office PC and the data stored there.
The majority of data programs use several sets of AT
commands when they function in host-mode
1. When the machine is started up in host-mode, other
parameters are necessary than those of the basic set-up.
"Read the user instructions for your program regarding
the necessary requirements.
LZTR104006 R1.00
12-3
Zat 14.4/14.4-7 and 19.2/19.2-7
Advertisement
Table of Contents
