Table of Contents
Advertisement
The modem has an extended set of S registers in addition to the S
registers defined in the Hayes standard. These +S registers are
operated with the commands:
+Sn=x
+Sn=Hx
+Sn=Bx
+$n?
+SnH?
+SnB?
+S0
Bit mapped options*
Assign register n the value x (x in decimal notation)
Assign register n the value x (x in hex notation)
Assign register n the value x (x in binary notation)
Display the value of register n in decimal notation
Display the value of register n in hex notation
Display the value of register n in binary notation
Binary code: CxxC x000
Default: 40 hex
Bit 0-2 | Not used
Bit3
| Bypass lest of 1300
0
|(+B0) | Disabled
Hz
1
1(+B1)
|Enabled
(See +B-command)
Bit4
|Z or X (Oslo)
O
|(+10) | Z-impulsing
impulsing
1
|(+I1)
| X-impulsing (Oslo)
(only used in Norway)
Bit S | Auto answer Channel | 0 | (+AB) | Answers in channel B
Choice
1
|(+AA) | Answers in channel A.
(See +A-command)
Bit6 | Speed conversion
0
|(+C0) | Inactive
(See +C-command)
1
|(+C1) | Enabled. When using
dumb/manual mode with DIP?
on, +C0 is default.
Bit 7 | Command mode
O
|(SAT)
|AT
(See +V and SAT)
1
|(4V)
[ITU-T V.25 bis
commands)
*Read more about country dependent parameters in appendix 5
LZTR104006 R1.00
4-13
Zat 14.4/14.4-7 and 19.2/19.2-7
Advertisement
Table of Contents
