Ericsson ZAT 19.2 Operation Manual page 306

16.2.2 +S- registers
No. [Possible' ~ ~ ]€ode_ Default] Description.
CxxC x000 Binary 40 hex. | Bit mapped option
+81 | Cx0C CCx Binary 40 hex | Bit mapped option
#$2 {5-255 Seconds 90 Dialback wait time
+S3 [2-255 Seconds 60 Wait lime for password
+84 |1-4 04 Number of dialback
altempts
+85 | AAAA AAAA Binary 8A hex | Bit mapped option
486 | xxxx 210000 Binary 8A hex {Bit mapped option
#87 [000 xOxx Binary 03 hex" | Bit mapped option
+88 | 1-255 1/10 Seconds {30 Inactivity timer
#89 | 000K xx00 Binary AC hex | Bit mapped option
+$10/0 Not used
+$12
+§$13 | 0-255 120 EQM Disconnect level
+§14| 0-255 120 EQM Retrain level
+815} 0-127 0 EQM monitor value
+816 | 0-255 45 Remote Escape code
character
+$17 | 0-255 1/50 sec 50 Remote Escape guard
time
+$18 | 1-255 255 Password/Dialback
locking funct.
+819 | xxAx xx00 Binary 50hex | Bit mapped option
+$20 | 0000 Oxxx Binary Othex | Bit mapped option
+821 | OOxx O0xx Binary 00 hex | Bit mapped option
#$22 | OOxx xOxx Binary 07 hex | Bit mapped option
+23 | xxx0 Oxxx Binary 00 hex | Bit mapped option
+$24/0-19 0 Last telephone entry
for dial backup
+$25/ 1-10 1 Dial backup attempts
for each entry
+#§$26/ 1-10 1 Dial backup attempts
for telephone list
4827 | XX0K XXX Binary 00 Bit mapped option
+§28 | 0-65 1/10 seconds |10sec {Delay between leased
line and dial backup
+$29 | Oxxx x0xx Binary 10 hex | Bit mapped option
+$30 | 0-127 013 MNP disconnect
character
4$31 | 00x xOCC 08 hex | Bit mapped option
"See 16.5 for more information about the parameters for different countries
16-6
Zat 14.4/14.4-7 and 19.2/19.2-7
LZTR104006 R1.00