Ericsson ZAT 19.2 Operation Manual page 104

3
DIC _ Disregard Incoming Call
Example:
DICL, OR This command is only accepted when an
incoming call is detected, and will result in the
'}call being ignored. When the call detection is
cleared, the command state will also be
cleared and the next incoming call will be
handled normally again
CIC Accept Incoming Call
Example:
CICK: ae [The modem will connect an incoming call |
SAT Set AT Command Mode
Example: .
SATL,
Modem answers OK
eek [ The modem now accepts only AT-commanas.
3.8 Result Codes in ITU-T V.25 bis:
LSN xx;yy..yy —_ Listing of stored number
The modem indicates that number yy..yy is stored in position no.
XX
Example:
LSN12; 473701 471 0 Ls The modem shows the number
slored in posilion no. 12
Result Code: jExplanation
CFINT Failed during dial
CFIAB Aborted call
CFICB Local DCE busy, no Dial tone
CFIET Engaged tone.
INC incoming Call.
The modem has received a call
VAL Valid Command.
INV Invalid Command
3-66 LZTR104006 R1.00
ZAT 14.4/14.4-7 and Zat 19.2/19.2-7