Ericsson ZAT 19.2 Operation Manual page 139

a l operation.
|V.24 signal | Description ee bFrome foo Ton
142 (TST) Test The modemwill indicate |DCE > |OTE
that a loop test has been
initiated.
109 (CD) Carrier Detect DCE > |DTE
104 (RXD) | Received carrier DCE > __|DTE
105 (RTS) _| Request to send DTE > _|DCE
106 (CTS) _| Clear to send DCE > |OTE
103 (TXD) Transmit data DTE > {DCE
108 (DTR) Data terminal ready (108.2), or DTE > DCE
connect dala set to line (108.1)
107 (DSR) _| Data set ready DCE > {DTE
125 (RI) Ring indicator DCE > |DTE
"The notion DATA switch is used in this chapter. This
means that you should press the DATA/VOICE switch or
equivalent, in command mode move cursor to the position
CALL or ANS and then press ROLL/EXEC, and in data
mode move crusor to the position DISC and press
ROLLUEXEC.
The next pages will explain how the menus is organized.
LZTR104006 R1.00 5-3
Zat 14.4/14.4-7 and Zat 19.2/19.2-7