Table of Contents
Advertisement
nual
operation
The cursor will stay at the MENU position, and the window below is
chosen by pressing the ROLL/EXEC switch.
The first line displays the possible choices.
Move the cursor (by pressing the CURS switch) to your choice, and
press the ROLL/EXEC switch.
SETUP _
Enter the setup/configuration menu.
CALL
Start a handshake in Call mode (A mode)
ANS
Start a handshake in Answer mode (B-mode)
TEST
Enter the loop test menu.
EXIT
Return to the top menu (See last page).
If simplified version has been chosen, the following window will
appear at power-up.
/ COMMAND: SWITCH 192 ASYNG
po ooo Test
The cursor will stay at the TEST position , and the test menu may be
entered. Note that
it is not possible to setup/configure the modem
when simplified version is in use.
5.4 Setup of automatic answer
Automatic answer may be setup in the SETUP menu. See the
description of the display map later in this chapter.
The automatic answer function may also be set by pressing the
alternating switch MAN/AUTO. The modem will then answer after
detection of one RING signal.
5-6
LZTR104006 R1.00
Zat
14.4/14.4-7 and Zat 19.2/19.2-7
Advertisement
Table of Contents
