Table of Contents
Advertisement
14.2
Test timer
The duration of a test is determined by the content of S register S18.
When a test has lasted for the time determined by the S18 value (in
seconds), the test is ended and the modem returns to command
state. The $18=x command sets the $18 value. The highest lega!
value is 255.
'|Disconnects the test timer (factory setting)
TS18=70 pts
Sets the test timer to 70 seconds
14.3
End Test, Using the &T0 Command
It is possible to interrupt a test by means of the &TO command.
Example 1
Interruption of Local analogue loopback or remote digital
loopback. —
The modem returns to command state
The test will be interrupted
Example 2
Interruption of Dignal loopback
The test will be interrupted.
14-2
LZTR104006 1.00
Zat 14.4/14.4-7 and 19.2/19.2-7
Advertisement
Table of Contents
