Table of Contents
Advertisement
46.
Synchronous operation
———~S~S@Y
Transmit / Receive Test
Call Out
Disconnect
Read Local Configuration
Write Local Configuration
Set Local Transmit Speed
Read Remote Configuration
Write Remote Configuration
Set Remote Transmit Speed
10.5.5
Supported configuration fields:
Leased / switched transmit level
Selected speed
Nominal / backup bit rate
Speed control mode
Primary / secondary mode
Transmit clock
Alarm tresholds
Autoanswer enable / disable
DTMF / Pulse dialing
Phone numbers
10.5.6
Compatibility
LPDAZ has the following limitations:
e It does not work together with encryption.
e Set Transmit Speed is not supported if the modem is
configured for
2400 b/s or 4800 b/s. This is due to the fact
that 2400 offers little or
no improvement over 4800 on
heavily impaired lines.
e If LDPAZ is enabled in synchronous mode, the modem will not
accept AT commands.
LDPA2 does work with the following functions in the modem:
e V.25bis
e Automatic Fallback/Fallforward
e Automatic Dialbackup
10-8
LZTR104006 R1.00
Zat 14.4114.4-7 and 19.2/19.2-7
Advertisement
Table of Contents
