Table of Contents
Advertisement
Regis er
+S31
Bit mapped options
Binary code: xxxx x0CC
Default: 08 Hex
Bit 1,0 | Password security
00|(+PAQ)
| No security on password
level
commands
(See +PA-command)
|01}(+PA1) | Security active
10|(+PA2)
| Security active, remote
controt off.
11)(+PA3)
| Highest security level
Bil 2
Not used
0
Bit 4, 3 | Transmit Compromise | 00 | (+Y0)
Disabled
Equaliser
01} (+¥1)
Standard equaliser
(See +¥-command)
| 10|(#¥2)'
| Selects an equaliser suited
for long cable connections
(Above 10 km)
11
Not used
Bit6,5 | HP-ENQ/ACK
00) (\HO)
Protocol disabled
protocol
01 | (\H1)
Modem emulates terminal
(See \H-command)
10] (\H2)
Modem emulates host
Bit 7
Fixed channel
0] (+&FCO) | Answer channel (B)
selection for 108.1
1|{+&FC1) | Originate channel (B)
and Voice/Data
(See +&FC-
command)
+S32
Delay between leased line attempts from
switched line
Default:
1
Unit: 15 ms
Range:
1-255
When the modem has performed a dial backup on switched line,
it will periodically try to establish the leased line connection
again. This register defines the time between each attempt. The
periodic lookback function is setup by the +&LB command.
"#"See also chapter 11 for further description
+$33
Disconnect time
Default:
150
Unit: 10ms
Range:
0-255
This register defines the delay the modem uses during a
disconnect. By changing this register the user can change the
response time for the H command or the time 109 (DCD) drops
during disconnect. (+U2).
Zat 14.4/14.4-7 and 19.2/19.2-7
Advertisement
Table of Contents
