Table of Contents
Advertisement
2.11.5
You obtain the dialling tone and the modem dials
the number
@ The number is dialled but nothing happens.
The switchboard is possibly not able to accept tone signals.
Try pulse signals.
If the modem does not pause long enough prior to commencing
to dial, you may place commas in as required (see above).
Repeat trying until you encounter the required number of
commas to obtain the desired result.
# The modem advises BUSY and the attempted connection
is interrupted.
The line is engaged.
Wait and try again later.
You have probably forgotten to set the modem to X-impulse
mode. This may be necessary in certain telephone districts
(such as Osto/Norway). Interrupt the contact, correct the modem
status and retry.
¢ The telephone continues to ring. The modem advises NO
CARRIER and breaks off the connection.
not in order.
2-15
Zat 14.4/14.4-7 and Zat 19.2/19.2-7
Advertisement
Table of Contents
