Table of Contents
Advertisement
3. Command sets' |
The D command may be followed by one or more of the
following Dial Modifiers:
Touch tone Dial of subsequent telephone numbers containing
digits 1-9 and/or symbols A, B, C, D, #, *.
Example:
ATDT4737011710
6%]
Pulse Dial of subsequent telephone number containing
digits 1-9.
"Note that use of Pulse Dialling can be restricted due to
PPT regulations.
Reverse Mode (answer/originate). When the R modifier is used,
the modem will connect as an answering modem. The remote
modem must connect as originating (see +A command).
Wait for Dial Tone before processing the next symbol in the dial
string.
Pauses register S8 seconds, before processing the next symbol
in the dial string. Add more commas to insert a longer pause. If
the modem
has problems with detecting an off-standard
dialtone, inserting one or several «,» can solve the problem.
Return to command state after dialling, without disconnecting
from the line. A semicolon enables the modem to send a
telephone number of more than 80 characters.
Example:
123456789; pi
Th
1
odem responds with resultcode
Dial stored number. The number has been stored by means of
the &Z command in non-volatile memory. (The number is stored
even after a power down).
The modem can store 20 numbers which can be dialled using
the S modifier.
LZTR104006 R1.00
3-1 1
Zat 14.4/14.4-7 and Zat 19.2/19.2-7
Advertisement
Table of Contents
