Ericsson ZAT 19.2 Operation Manual page 83

command sets .
+Q Extra Result Codes
Commands: +Q0, +Q1,+Q2, +Q3
AT+Q0¢%|
AT+Q1 pita) ©
AT+Q2¢efal)
AT#O3 6%]
Examples:
No extra result codes (Hayes compatible)
' | CONNECT 9600/REL (V.42 active)
Extra CONNECT message enabled
Ex.
CONNECT 9600
-[Ex. CONNECT 9600/REL/19200
The CONNECT message will contain both line
speed, OTE speed and REL if V.42 is active.
As +Q2, and V.42 class if active.
Ex. CONNECT 9600/REL/19200 V.42 bis
CONNECT 2400/REL/9600/MNP5
(MNP with compression)
CONNECT 2400/REL/9600/LAPM
(V.42 without compression)
CONNECT2400/REL/9600/V.42 BIS/DES
(V.42 with compression and encryption)
CONNECT 9600/REL/9600/V.42 BIS/DES/TCM
(V.42 with compression, with encryption and trellis coded
modulation)
Result codes described on page 3-56.
LZTR104006 R1.00
3-45
ZAT 14.4/14.4-7 and Zat 19.2/19.2-7