Table of Contents
Advertisement
3.Commandsets
Example of adding a single command to the exception list:
AT+PE1=8&D3¢%=|
The command interpreter will check the command &D3
according to the +PG setting.
Example of adding multiple commands to the exception list.
AT#PE1=801:8D2¢a)
lf a command
is to be protected for all its parameters
then add this command to the exception list without a
parameter.
AT+PE1=&Dgis|
The command interpreter will check the commands &D,
&DO, &D2, and &D3 according to the +PG setting.
Delete command(s):
AT+PE2=<XXX> [: <XXX> 3 <XXX> ...]pfal]
e The +PE2 command will report ERROR if an entry in the
command line is not already in the exception list.
e There is no single command to delete all commands in the
exception list.
Example of deleting one command.
AT+PE2=&D1 |
Delete command(s) from the exception list:
AT+PE2=&D2:D095p™|
3-38
LZTR104006 R1.00
Zat 14.4/14.4-7 and Zat 19.2/19.2-7
Advertisement
Table of Contents
