Table of Contents
Advertisement
7. Encryption __
Answering modem:
= Enter password entry for remote login
K=01-01
specifies the key index.
=Enter 2 keys identical to remote keys.
= Set fixed encryption
AT+PC2g¢a|
=>Password mode on
AT+P01 pital
=>Autoanswer
ATSO=1 |
=>Set synchronous mode
AT&M1 pl
=>Make CT-106 go off during handshake
|
AT&S2¢%|
oes
= Set dumb mode and store configuration
AT+PN1&Wesal
|
All of the above settings may also be set from the display
menus.
7.5.2.
Operation of the modems:
(Synchronous DTE's are connected).
=>The user at the originating modem
starts the session by
pressing the VOICE/DATA switch on the front.
The modem will automatically start dialling the stored number.
When the handshake is completed the modem will execute an
automatic login sequence using the password stored in the
password table (PASS0123).
Then the synchronous encryption part of the modems will
activate and both modems turn CT109 and CT106 on. This
triggers the DTE which will start sending and receiving data.
The modem is disconnected by pressing the VOICE/DATA
switch or by dropping CT 108.2.
LZTR104006 R1.00
7-15
Zat 14.4/14.4-7 and
19.2/19.2-7
Advertisement
Table of Contents
