Table of Contents
Advertisement
'Note 1: The commands &W, &YO, &Y1
will be disabled
for all +PG settings except +PGO.
This means that these
commands are handled separately, being a member of
the exception list or not.
"Note 2: The commands &F and Z will not overwrite the
current settings defined by +PA, +PG and +PO.
"#"Note 3: If a lock situation occurs (+PA, +PE or +PG is
disabled) the modem can be brought to factory setting
from the display menu.
+PIN
PIN code control
Commands:
+PIN=<code>
Enter new PIN code
+PIN=
Delete PIN code
+PIN?
Display PIN code
The parameter <code> is a string from 1 to 8 characters in the range
A-Z and 0-9.
There is no special protection of the +PIN command and to protect
these the normal password access control should be used, +PA.
Profile guarding, +PG, may also be used for protection.
There is no special command for enabling the PIN code. If configured
with a PIN code the modem will require this code else the modem is
unprotected.
When configured for protected mode i shall not be possible to access
the modem after a power on reset (POR).
+PK
Store encryption keys
Command:
+PKnn
Syntax:
AT#PKnn=XXXXXXXXXXXXXXXX pea
nn
Key index from 00 to 99.
XX
Key data. Consists of 16 hexadecimal values from 0 to F.
3-40
LZTR104006 R1.00
Zat 14.4/14.4-7 and Zat 19.2/19.2-7
Advertisement
Table of Contents
