Table of Contents
Advertisement
+S6
Bit mapped options
(DCE Configuration)
Binary code: xxxx xxxx Default:
BA hex
Default line speed: 14400 bps
Defined as +S5. +S6 is set equal to +S5 whenever there is a
change in speed or format on the AT command prefix received.
In off-line command mode all bits in +S6 may be changed. In on-
line command mode only bit 7,6,5,4 may be changed.
This register lets the user specify the modem line speed and
format independent of DTE speed and format. The autospeed
detect function must be Inactive (+MO
in answer, +MO or +M1
in
originate.)
Examples:
If you wish to establish a connection using a baudrate at 14400
bps and your terminal doesn't operate at this speed. You may
use Speed Conversion .
Enter the following command for A-modem:
AT+M0+C1+S6=1 1389p
ATDnef|
+$6=138
Character format= 8N1
«
|DCE speed = 14400 bps
The B-modem must be configured as follows:
AT+M0+C1+56=1 seetel
Speed detection off (+M0 at answer/call and +M1 at call) the
modem will try to handshake at a baudrate set in +S6 (+S5)
You may use %G and "%B command to set the speed. This may
be easier.
4-16
LZTR104006 R1.00
Zat 14.4/14 4-7 and 19.2/19.2-7
Advertisement
Table of Contents
